Maintain a bromine spa with label-led feeder adjustment, water testing and routine care. No universal tablet count or fixed refill duration applies.
Spa bromine tablets supply sanitiser gradually through a compatible feeder. They are one part of water care, not a guarantee that water is suitable for bathing. Follow the actual pack, spa and feeder instructions rather than a fixed tablets-per-litre rule or refill schedule.
A feeder controls tablet exposure to circulating water. Whether it is appropriate depends on the spa and chemical instructions. The 20g in 20g bromine tablets describes the weight of one tablet, not a water-treatment dose. Dissolution and consumption depend on feeder flow, water conditions and bathing demand.
Follow the spa's operating requirements and testing routine. Tablet release does not replace filtration, filter cleaning, water changes or pH testing. See the water balance guide for the role of the different readings.
If the spa requires an oxidising or corrective treatment, follow that treatment product's label and the spa instructions. Do not assume an extra product or fixed timetable will reduce tablet use. Never mix products together or put another chemical into the tablet feeder.
Follow the pack's handling, storage and protective-equipment directions. Keep chemicals sealed and inaccessible to children and pets. Never mix sanitisers, including residues in containers or feeders. Do not bathe in unresolved cloudy water or while readings are outside operating limits.
Follow your spa's operating requirements and monitoring instructions. A general residual range is not a product-specific tablet dose, and a bromine reading alone does not establish that water is suitable for bathing.
There is no universal tablet count or dosing interval. Use the actual label, measured spa volume and feeder instructions, then circulate and retest before adjusting.
Follow your spa and treatment-product instructions. Do not add a shock product on a guessed dose or timetable, and never mix it into a tablet feeder.
Do not mix sanitisers or use a feeder containing another product's residue. Change systems only under an approved procedure for your exact spa and products.
For more on the feeder routine, read how bromine tablets work in hot tub water or the label-led dosing guidance.